Primary Navigation
Book Contents Navigation
ME 2700 Introduction 1: Course Description, Objectives, and Module Overview
ME 2700 Introduction 2: Course Setup and Design Process (DFSS)
ME 2700 Introduction 3: DMADVR Phases and Tools within the DFSS Process
ME 2700 Introduction 3a: DMADVR - Test for Understanding Activity
Module 00: Overview
Micro-economy Kit Overview
Chapter 1: Developing Nations: Problems and Solutions
Chapter 2: Sustainability
Module 1: Overview
Define Phase
Chapter 1: Project Charter
Chapter 2: Project Plan Development
Chapter 3: Industry Perspective
Example Project: Gearbox Subassembly, MPI, Drawing, and Video
Module 2: Overview
Measure Phase
Chapter 1: Customer Requirements
Chapter 2: Market Analysis
Chapter 3: Engineering Characteristics/Specifications and Benchmarking
Chapter 4: Industry Perspective
Module 3: Overview
Analyze Phase
Chapter 1: Introduction to Form (Morphology) in Engineering Concept Generation
Chapter 2: Functional Analysis and Concept Generation
Chapter 3: QFD (House of Quality w/Decision Matrix) - HoQ w/DM
Chapter 4: Final Project Plan and Concept Presentation
Chapter 5: Industry Perspective
Module 4A: Overview
Design Phase
Chapter 1: Modeling
Chapter 2: Design Failure Mode & Effects Analysis (DFMEA)
Chapter 3: Engineering Drawings and MPIs
Module 4B: Overview
Design Phase Cont'd
Chapter 4: BOM, Purchase Order and Part Cost
Chapter 5: Profit and Loss
Chapter 6: Industry Perspective
Module 5: Overview
Verify Phase
Chapter 1: Test Planning and Results
Chapter 2: Prototype Manufacture/Fabricate/Assemble
Chapter 3: Industry perspective
Module 6: Overview
Report Phase
Chapter 1: Design Results Reporting
Appendix 1: Accessibility Assessment
Module 4B – Design Continued
Watch the Interactive Video Below:
Previous/next navigation
Introduction to Mechanical Engineering Design Copyright © 2023 by Jacqulyn A. Baughman is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License, except where otherwise noted.